SIEMENS NIM-1W MXL LAN WAN NETWORK INTERFACE MODULE NIB Fresh Stock

Description

removed due to upgrade but item is recently installed
Model NIM-1W is a Siemens Industry, Inc. ─ Fire Safety full-width network interface module that communicates MXL system information to an on-board analog modem, Model NIM-1M, which is a daughter board that connects directly onto Model NIM-1W module. When Model NIM-1M is connected to Model NIM-1W, MXL system information can be transmitted over dedicated, twisted-pair telephone wires.
Model NIM-1M can transmit MXL system(s) information on dedicated telephone wire (18-26 AWG), and / or a dedicatedlineconditionedfor19.2Kbaudrate,allowing for MXL communication distances to be extended. Models NIM-1W / NIM-1M communicates with other NIM-1W / NIM-1M, thus forming a long distance communication bridge that can interconnect a single MXL or local MXL network with a remote network and / or single MXL panel. Models NIM-1W / NIM-1M occupies one (1), full Model MOM-series card cage slot, and communicates directly with the MXL panel’s networking interface module (NIM-1R).
Since Models NIM-1W / NIM-1M function as a communication bridge, each module is then transparent (takes no network addresses) to the overallsystemconfiguration. Hence,theMXL systems function as one, unified MXL
network (X-NET).
A maximum of two (2) communication bridges can be
installed in a series (refer to Case Scenario #3).
The FireFinder Network Command Center, a Global MKB, and / or a global RCC (Remote Command Center) can serve as the central control / monitoring point. The maximum amount of panel addresses (MXL, MXL-IQ, MXLV and NCC) allowed on a MXL network system is 64. Interactive programming between MXL panels is supported.
Style 4 or Style 7 wiring is supported among the MXL system(s). The modem transmission line connected to Model NIM-1M is Style 4. Style 7 can be achieved by using two sets of Models NIM-1M / NIM-1W in both the local and the remote panel.
Model NIM-1M is equipped with nine (9) status LEDs, which indicate the modem communication status.
Temperature and Humidity Range
Products are  UL 864 9th Edition listed for indoor dry locations within a temperature range of 120+/-3°F (49+/-2°C) to 32+/-3°F (0+/-2°C) and at a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/2°C).