Proxmark3 Easy IC V3 512k M1 RDV4 Built-in Integrated Antenna Decryptor Antenna

Description

Home
Proxmark3 Easy V3 IC 512k M1 RDV4 Built-in Integrated Antenna Decryptor Antenna
Description
Description:
The Proxmark3 is a research and development tool. It has not been evaluated for compliance with regulations governing transmission and reception of radio signals. You are responsible for using this product in compliance with your local laws.
The priginal chips,Brand components and  capacitance resistance,the antenna accrucy matching,SMT sticking machine.
Updated hardware:
2 USB Ports allow portable power source for portable sniffing/spoofing/reading
Atmel 512kb AT91SAM7S512 controller means you can install latest and greatest Iceman firmware
Read, Write, Clone, Copy, Spoof RFID tags of 13.5mHz and 125kHz, including HID, Indala, T55xx, MiFare Classic / 1k, and more. Typical RFID cards and fobs for apartments, work, garages, gates, and other doors use these technologies, so you can make copies.
This requires some knowledge to flash firmware and operate. You will need a laptop/desktop computer with a USB port and be comfortable running terminal / command line commands to use the Proxmark 3.
This comes with a rewriteable T5577 (125khz) fob and Changeable UID 1k (13.5mhz mifare) fob. If you want lots of tags/fobs, or specific tags/fobs, message me, and I'll create a custom item for you.
Reader, writer, copier, cloner, RFID, NFC.
This does NOT have quick-swappable/detachable antennae. It is built on the Easy platform, and has 512K flash EEPROM, so you can flash the latest RRG/Iceman firmware, which is too big for a 256K proxmark3, but allows for advanced functions, especially cracking.
Compared with PM3 RD V3.0 improvement:
- Built-in high-frequency antenna, antenna depth matching, eliminate blind spots, read the whole card data flowing without interruption.
- Increase Parse the secret key rate , the size of the card takes all.
-  Sniffing data, complete stable, low error rate.
- The low frequency antenna to improve the signal to noise ratio, the higher the recognition rate, detachable design to meet various needs.
- No antenna interface, did not  need have to plug because  it is  easy to damaged.
- Cancel the lithium battery, simple and convenient. (Offline can use mobile power supply)
- In addition to the original relay and other unrelated, low cost, lightweight and portable.
Specification:
- Operating voltage: 3.5-5.5V
- Current job: 50-130mA
- Length and width dimensions: 54mm * 86.6mm
- The thickness: 6.2mm (thinnest) 9.8mm (plus screw) 15.8 (plus low frequency antenna)
High Frequency Operating card mode:
- Conventional M1 S50 card reader and other 14443A Class B card.
- Use the PRNG vulnerability parsing sector 0.
- Use nested (mfoc) vulnerability resolve the whole card.
High Frequency Analog card mode:
- Analog Mi series S50 / Ultralight / DESFire card UID.
- Analog M1 S50 whole sector data. (Pick a card reader)
- Analog M1 S50 shell, to obtain data to calculate the secret key (pick a card reader)
High Frequency Silent Mode:
- Silent sniffer data communication between the M1 S50 card and card reader, analytical secret key.
- Silent sniffing 14443A Class B card reader with a complete communications data.
- Reader device can be used for debugging and behavior analysis.
Low Frequency Operating Card Mode:
-Read
ID, H-ID, T55XX, Indala and other low-frequency card.
- By T55XX card write ID / H-ID / Indala, turned into three cards.
Low Frequency Analog Card Mode
- Enter ID / H-ID card, analog to the specified card type.
- Analog modulation schemes specified data cards and ASK / FSK / PSK
Low Frequency Silent Mode:
- Silently sniff data between the card and the reader (less, not tested)
- Compatible with all official firmware, according to need to brush any version.
- According to your preference, you can use the official "Command Line" or "Proxmark Tool.exe" to operate
(Low frequency antenna installed on the right side)
# LF antenna: 29.84 V @ 125.00 kHz
# LF antenna: 32.31V @ 134.00 kHz
# HF antenna: 28.43V @ 13.56 MHz
(Low frequency antenna installed on the left)
# LF antenna: 43.86 V @ 125.00 kHz
# LF antenna: 24.48 V @ 134.00 kHz
# HF antenna: 25.13 V @ 13.56 MHz
Card Type Description
：
HID 125K card: low frequency card can be replaced by T5577
TS577 125K card: low frequency card
EM4X 125K card: ID card that can be encrypted
M1 UID 13.56M card: M1S50 copy card
M1S50 13.56M card: ordinary ic card card number cannot be changed, each is a separate card number
Note:
Normally use the socket framed by the USB cable, the socket on the side is to supply power to the device when collecting
Package Include:
1x PM3 Easy  main board  (firmware 2.0.0)
1x USB line
5x Card
2x The Shell Plate
Policy
1.Payment
● We accept Payment via PayPal only.
VAT and TAX is not included, please note.
2.Delivery details
● Will ship order within 1 working days after get your payment.
● Shipping to US,AU,UK and CA takes about 7-15 working days for delivery normally.
3.Return
●Please note that we only accept returns within 30 days after delivery.
4.About us
● We will make every effort to make your shopping the most pleasant and wonderful! Any question feel free to contact us!
On Jan-14-21 at 11:07:14 PST, seller added the following information: